سوالات و مشکلات مربوط به کنسول Xbox 360

Console

ناظم سابق انجمن
کاربر سایت
Nov 2, 2007
8,441
نام
پدرام
يه سوال فني داشتم:xbox360 eliteمشكل سه چراغ قرمزو داره؟

اگر X-Clamp روش انجام بشه و 12 ولت بشه Fan هاش احتمالش به صفر میرسه.

البته مادربوردش زفیر با هیتسینک اضافه هست و با یه Intercooler هم که داشته باشی مشکلی براش پیش نمیاد اگر وضعیت هوای اطرافش مشکل نداشته باشه.
 

Console

ناظم سابق انجمن
کاربر سایت
Nov 2, 2007
8,441
نام
پدرام
پدرام عکس ها چی شد؟؟؟ من هرچی گشتم چیزی پیدا نکردم!!!

اون تبدیل بالایی که رنگ خاکستری هست رو باید بخری.

6c48225b9da07f6c93b53110.L.jpg
 

Console

ناظم سابق انجمن
کاربر سایت
Nov 2, 2007
8,441
نام
پدرام
ممنون ولی اون نوک طلایی به کجا می خوره؟؟؟:confused:

این نوک طلایی مثل همون نوک ورودی Speaker به PC هست.من امتحان نکردم.ولی Speaker پشتش باید این رو داشته باشه که مال من داره و فکر کنم ساپورت می کنه.
 

Console

ناظم سابق انجمن
کاربر سایت
Nov 2, 2007
8,441
نام
پدرام
xbox 360 مدل هیلو هم 3چراغه میده (مادربرد فالکون)؟ :eek:اگه3 چراغه میده چه کار باید کرد

تا حالا که من جایی ندیدم بحث 3 چراغ شدنش بوده باشه.
مادربورد های فالکون خدا رو شکر خرابیشون خیلی خیلی کم هست.
اگر هم 3 چراغ داد X-Clamp باید انجام بدی روش.
 

Console

ناظم سابق انجمن
کاربر سایت
Nov 2, 2007
8,441
نام
پدرام
سلام. سه چراغ شدم :(
اولش این میاد هنگ میکنه.
v5bgc3.jpg

بعدش خاموش روشن میکنم سه چراغ میده!

kby44.jpg

این چیزی که توی تصویر هست 2 چراغ قرمزه.فکر کنم جای امید باشه.یکی از روش های حل مشکلت X-Clamp هست که با توجه به خارج از ایران بودن شما باید خودتون یا یه تعمیرکار وارد این رو تعمیر کنه.

Info:
Overheating

Solution(s):
- Let the Xbox 360 console cool. You may have to wait several hours for the console to cool enough. Do not turn on the console when the console is hot.
- Verify that the console has sufficient ventilation and that the fan is operating. For more information about ventilation, see the "More Information" section.

این رو ترجمه کنی می فهمی باید چیکار کنی.دستگاهت داغ کرده و زمانی که هنوز داغ هست نباید روشنش کنی.

اگر 3 چراغ هست یکی از موارد زیره :

Leds 1, 2, 3, and 4 are flashing red:
Related topic(s) on 360-Hq.Com:
none

Info:
The AV cable cannot be detected by the console

Solution(s):
- Make sure that the AV cable is correctly connected to the Xbox 360 console.
- Disconnect the AV cable from the Xbox 360 console, and then reconnect the AV cable to the Xbox 360 console.
- If the four flashing red lights continue to flash, try wiping the metal area of the AV pack with a dry cloth. The metal area is the end that plugs into the console. Wipe the metal area thoroughly, and then try the AV Pack again.
- If the AV cable is correctly connected but the four red lights are still flashing, substitute a different AV cable if you have one available.

Leds 1, 3, and 4 are flashing red:
Related topic(s) on 360-Hq.Com:
none

Info:
General Hardware Failure
The specific type of hardware failure can be determined by a "hidden" error code:

- Turn the xbox 360 on, and wait till the 3 red lights are flashing.
- Press and hold the sync up button (the small white one), while holding that button press the eject button.
- The LEDs will now blink the first number in the code (as described below).
- Release the eject button and press it again.
- The LEDs will now blink the second number of the code.
- Release the eject button and press it again.
- The LEDs will now blink the third number of the code.
- Release the eject button and press it again.
- The LEDs will now blink the forth number of the code.
- Release the eject button and press it again.
- The LEDs will go back to the 3 red flashing lights.

You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:

* All four lights flashing - 0
* One light flashing - 1
* Two Lights flashing - 2
* Three lights flashing - 3

0001 power supply problem
0002 power supply problem
...
0010 over heating
0011 over heating
0012 over heating
0013 over heating
...
0020 (Not yet known, possibly overheating)
...
0022 GPU Error / GPU Overheating
...
0102 unknown error - littereally means the console does not know what is wrong. possibly a short or cold solder joint somewhere (2 reports of people repairing this, one was removing moisture build up inside the console, the other used a hot-air rework to reflow the BGA Ram chips)
...
0110 (Not yet known)
...
1022 (Not yet known)

Solution(s):
- Try restarting the console.
- If restarting the console does not resolve the behavior, follow these steps:
* Turn the console off.
* Unplug all the power and AV cables from the console.
* Unplug the power cord from the wall socket.
* Firmly reconnect all the cables.
* Turn on the console.
- If these steps do not resolve the behavior, turn the console off, remove the hard drive, and then turn on the console. If the 3x Red LED error light is no longer displayed, turn the console off, re-attach the hard drive, and then turn on the console.
 
آخرین ویرایش:

MEHDIMDI

کاربر سایت
Apr 20, 2007
1,929
نام
مهدی
همونطور که پدرام جان گفتن این دو چراغ علتش اور هت شدنه کنسوله (داغ کردن بیش از حد) .کنسول من یه بار بعلت از کار افتادن فنهاش دو چراغ شد ولی بعدش مشکلی پیش نیومد . فنهاشو چک کن .
اولا کنسول شما بعد از چه مدت دو چراغ میشه ؟ ثانیا هنگ میکنه یا نه ؟
وقتی دو چراغ شد بذار کاملا سرد بشه بعدش روشن کن . اگه 12 ولت نکردی حتما 12 ولتش کن ببین دو چراغ میده !
 

کاربرانی که این قسمت را مشاهده می‌کنند

Top
رمز عبور خود را فراموش کرده اید؟
or ثبت‌نام سریع از طریق سرویس‌های زیر